2-101
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear l2protocol-tunnel counters
clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command on the switch stack or on a
standalone switch to clear the protocol counters in protocol tunnel ports.
clear l2protocol-tunnel counters [interface-id]
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet1/0/3
Related Commands
interface-id (Optional) Specify the interface (physical interface or port channel) for
which protocol counters are to be cleared.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show l2protocol-tunnel Displays information about ports configured for Layer 2 protocol
tunneling.
To Next Page
Loading...
Need help?
General