2-103
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear logging onboard
clear logging onboard
Use the clear logging onboard privileged EXEC command on the switch stack or on a standalone switch
to clear all of the on-board failure logging (OBFL) data except for the uptime and CLI-command
information stored in the flash memory.
clear logging onboard
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines We recommend that you keep OBFL enabled and do not erase the data stored in the flash memory.
Examples This example shows how to clear all the OBFL information except for the uptime and CLI-command
information:
Switch# clear logging onboard
Clear logging onboard buffer [confirm]
You can verify that the information was deleted by entering the show logging onboard onboard
privileged EXEC command.
Related Commands
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
hw-module module [switch-number] logging onboard Enables OBFL.
show logging onboard onboard Displays OBFL information.
To Next Page
Loading...
Need help?
General