C-16
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform ip unicast vrf tcam-label
show platform ip unicast vrf tcam-label
Use the show platform ip unicast vrf tcam-label privileged EXEC command to display PBR and
VRF-Lite labels and the number of labels in use by PBR.
show platform ip unicast vrf tcam-label [ | {begin | exclude | include} expression]
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.