C-41
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform stack manager
show platform stack manager
Use the show platform stack manager privileged EXEC command to display platform-dependent
switch-stack information.
show platform stack manager {all | counters | trace [sdp [reverse] | state [reverse]]}
[ | {begin | exclude | include} expression]
Note This command is supported only on Catalyst 3750-X switches.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
all Display all information for the entire switch stack.
counters Display the stack manager counters.
trace [sdp [reverse]] Display trace information. The keywords have these meanings:
• sdp—(Optional) Display Stack Discovery Protocol (SDP) information.
• reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
trace [state [reverse]] Display trace information. The keywords have these meanings:
• state—(Optional) Display stack state machine information.
• reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
