Cisco Catalyst 3560X-24P User Manual

2-52
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
auto qos classify
auto qos classify
Use the auto qos classify interface configuration command to automatically configure quality of service
(QoS) classification for untrusted devices within a QoS domain. Use the no form of this command to
return to the default setting.
auto qos classify [police]
no auto qos classify [police]
Syntax Description
Defaults Auto-QoS classify is disabled on the port.
When auto-QoS is enabled, it uses the ingress packet label to categorize traffic, to assign packet
labels, and to configure the ingress and egress queues
Command Modes Interface configuration
Command History
police (Optional) Configure QoS policing for untrusted devices.
Ta b l e 2-1 Auto-QoS Configuration for the Ingress Queues
Ingress Queue Queue Number CoS-to-Queue Map
Queue Weight
(Bandwidth)
Queue (Buffer)
Size
SRR
1
shared
1. SRR = shaped round robin. Ingress queues support shared mode only.
1 0, 1, 2, 3, 6, 7 70 percent 90 percent
Priority 2 4, 5 30 percent 10 percent
Ta b l e 2-2 Auto-QoS Configuration for the Egress Queues
Egress Queue Queue Number CoS-to-Queue Map
Queue Weight
(Bandwidth)
Queue (Buffer) Size
for Gigabit-Capable
Ports
Queue (Buffer)
Size for 10/100
Ethernet Ports
Priority (shaped) 1 4, 5 up to 100 percent 25 percent 15 percent
SRR shared 2 2, 3, 6,7 10 percent 25 percent 25 percent
SRR shared 3 0 60 percent 25 percent 40 percent
SRR shared 4 1 20 percent 25 percent 20 percent
Release Modification
12.2(55)SE This command was introduced.

Cisco Catalyst 3560X-24P Specifications

General

Brand	Cisco
Model	Catalyst 3560X-24P
Category	Switch
Language	English