2-394
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
mls qos srr-queue output cos-map
mls qos srr-queue output cos-map
Use the mls qos srr-queue output cos-map global configuration command on the switch stack or on a
standalone switch to map class of service (CoS) values to an egress queue or to map CoS values to a
queue and to a threshold ID. Use the no form of this command to return to the default setting.
mls qos srr-queue output cos-map queue queue-id {cos1...cos8 | threshold threshold-id
cos1...cos8}
no mls qos srr-queue output cos-map
Syntax Description
Defaults Table 2-20 shows the default CoS output queue threshold map:
Command Modes Global configuration
Command History
queue queue-id Specify a queue number.
For queue-id, the range is 1 to 4.
cos1...cos8 Map CoS values to an egress queue.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
threshold threshold-id
cos1...cos8
Map CoS values to a queue threshold ID.
For threshold-id, the range is 1 to 3.
For cos1...cos8, enter up to eight values, and separate each value with a
space. The range is 0 to 7.
Ta b l e 2-20 Default Cos Output Queue Threshold Map
CoS Value Queue ID–Threshold ID
0, 1 2–1
2, 3 3–1
4 4–1
5 1–1
6, 7 4–1
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General