Cisco Catalyst 3560X-24P User Manual

2-696
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show mka session
show mka session
To display a summary of active MACsec Key Agreement (MKA) Protocol sessions, use the show mka
session privileged EXEC command.
show mka session [interface interface-id] [port-id port-id]] [local-sci sci] [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is sample output of the show mka session command:
Switch# show mka session
Total MKA Sessions....... 1
Secured Sessions... 1
Pending Sessions... 0
================================================================================
Interface Peer-RxSCI Policy-Name Audit-Session-ID
interface interface-id (Optional) Displays status information for active MKA sessions on an
interface.
port-id port-id (Optional) Displays a summary of active MKA sessions running on the
interface with the specified port ID. To see the port ID, enter the show mka
session interface interface-id command. Port identifier values begin at 2 and
monotonically increase for each new session that uses a virtual port on the
same physical interface.
local-sci sci (Optional) Displays status information for the MKA session identified by the
Local TX-SCI. To determine the Local TX-SCI for a specific session, enter
the show mka session command without any keywords. The SCI must be 8
octets (16 hexadecimal digits) long.
detail (Optional) Displays detailed status information about all active MKA
sessions, all sessions on the specified interface, or on the specified interface
with the specified port ID.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3560X-24P Specifications

General

Brand	Cisco
Model	Catalyst 3560X-24P
Category	Switch
Language	English