2-76
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
boot private-config-file
boot private-config-file
Use the boot private-config-file global configuration command on a standalone switch to specify the
filename that Cisco IOS uses to read and write a nonvolatile copy of the private configuration. Use the
no form of this command to return to the default setting.
boot private-config-file filename
no boot private-config-file
Syntax Description
Defaults The default configuration file is private-config.
Command Modes Global configuration
Command History
Usage Guidelines This command works properly only from a standalone switch in a stack.
Filenames are case sensitive.
Examples This example shows how to specify the name of the private configuration file to be pconfig:
Switch(config)# boot private-config-file pconfig
Related Commands
filename The name of the private configuration file.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.
To Next Page
Loading...
Need help?
General