2-420
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
no authentication logging verbose
no authentication logging verbose
Use the no authentication logging verbose global configuration command on the switch stack or on a
standalone switch to filter detailed information from authentication system messages.
no authentication logging verbose
Defaults All details are displayed in the system messages.
Syntax Description This command has no arguments or keywords.
Command Modes Global configuration
Command History
Usage Guidelines This command filters details, such as anticipated success, from authentication system messages.
Examples To filter verbose authentication system messages:
Switch(config)# no authentication logging verbose
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Release Modification
12.2(55)SE This command was introduced.
Command Description
no authentication
logging verbose
Filters details from authentication system messages.
no dot1x logging
verbose
Filters details from 802.1x system messages.
no mab logging
verbose
Filters details from MAC authentication bypass (MAB) system messages.
To Next Page
Loading...
Need help?
General