C-43
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform stack ports
show platform stack ports
Use the show platform stack ports privileged EXEC command to display platform-dependent stack
information.
show platform stack ports {buffer | history}[ | {begin | exclude | include} expression]
Note This command is supported only on Catalyst 3750-X switches.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of the show platform stack port buffer command output:
Switch# show platform stack ports buffer
Stack Debug Event Data Trace
==============================================================
Event type LINK: Link status change
Event type RAC: RAC changes to Not OK
Event type SYNC: Sync changes to Not OK
==============================================================
buffer Display the stack port link and sync state events.
history Display the stack port history.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
