C-4
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform configuration
show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
show platform configuration {config-output | default | running | startup} [ | {begin | exclude |
include} expression]
Note This command is not supported on switches running the LAN base feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
config-output Display the output of the last auto-configuration application.
default Display whether or not the system is running the default configuration.
running Display a snapshot of the backed-up running configuration on the local
switch.
startup Display a snapshot of the backed-up startup configuration on the local switch.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
