2-107
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear mka
clear mka
To clear MACsec Key Agreement (MKA) protocol sessions or information, use the clear mka privileged
EXEC command.
clear mka {all | sessions [interface interface-id [port-id port-id]] | [local-sci sci] | statistics
[interface interface-id port-id port-id] | [local-sci sci]}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines When you enter the clear mka all command, the switch prompts for a confirmation and then deletes all
active MKA sessions.
Examples This example clears all active MKA sessions:
Switch# clear mka all
Are you sure you want to do this? [yes/no]: yes
This example clears the statistics counter of a specific MKA session running with Local TX-SCI
0023330853030002:
Switch# clear mka statistics local-sci 0023330853030002
all Clears all MKA sessions and global statistics.
sessions Clears all MKA sessions.
interface interface-id (Optional) Clears all active MKA sessions on the interface.
port-id port-id (Optional) Clears the MKA session on the specified interface with the
specified port ID. The port-ID range is 1 to 65535.
local-sci sci (Optional) Clears all active MKA sessions with the specified Local TX-SCI,
a 64-bit hexadecimal string.
statistics Clears all MKA statistics and error counters. Enter additional keywords to
clear counters only for an interface or Local TX-SCI.
• interface interface-id port-id port-id—Clears MKA session statistics
for the specified interface and port ID.
• local-sci sci—Clears MKA session statistics for the specified Local
TX-SCI.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General
