2-93
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
clear eap sessions
clear eap sessions
Use the clear eap sessions privileged EXEC command on the switch stack or on a standalone switch to
clear Extensible Authentication Protocol (EAP) session information for the switch or for the specified
port.
clear eap sessions [credentials name [interface interface-id] | interface interface-id | method
name | transport name] [credentials name | interface interface-id | transport name] ...
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all counters by using the clear eap sessions command, or you can clear only the specific
information by using the keywords.
Examples This example shows how to clear all EAP information:
Switch# clear eap sessions
This example shows how to clear EAP-session credential information for the specified profile:
Switch# clear eap sessions credential type1
You can verify that the information was deleted by entering the show dot1x privileged EXEC command.
Related Commands
credentials name Clear EAP credential information for the specified profile.
interface interface-id Clear EAP information for the specified interface.
method name Clear EAP information for the specified method.
transport name Clear EAP transport information for the specified lower level.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show eap Displays EAP registration and session information for the switch or for
the specified port
To Next Page
Loading...
Need help?
General