A-6
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
copy
copy
Use the copy boot loader command to copy a file from a source to a destination.
copy [-b block-size] filesystem:/source-file-url filesystem:/destination-file-url
Syntax Description
Defaults The default block size is 4 KB.
Command Modes Boot loader
Command History
Usage Guidelines Filenames and directory names are case sensitive.
Directory names are limited to 45 characters between the slashes (/); the name cannot contain control
characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Filenames are limited to 45 characters; the name cannot contain control characters, spaces, deletes,
slashes, quotes, semicolons, or colons.
If you are copying a file to a new directory, the directory must already exist.
Examples This example show how to copy a file at the root:
switch: copy flash:test1.text flash:test4.text
.
File "flash:test1.text" successfully copied to "flash:test4.text"
You can verify that the file was copied by entering the dir filesystem: boot loader command.
Related Commands
-b block-size (Optional) This option is used only for internal development and testing.
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
/source-file-url Path (directory) and filename (source) to be copied.
/destination-file-url Path (directory) and filename of the destination.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
delete Deletes one or more files from the specified file system.
To Next Page
Loading...
Need help?
General