A-2
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
arp
arp
Use the arp boot loader command to display the contents the Address Resolution Protocol (ARP) table.
arp [ip_address]
Syntax Description
Command Modes Boot loader
Command History
Usage Guidelines The ARP table has the IP-address-to-MAC-address mappings.
Examples This example shows how to display the ARP table:
switch: arp 172.20.136.8
arp'ing 172.20.136.8...
172.20.136.8 is at 00:1b:78:d1:25:ae, via port 0
ip_address (Optional) Show the ARP table or the mapping for a specific IP address.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General