Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
rmon collection stats
2-489
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
rmon collection stats
Use the rmon collection stats interface configuration command on the switch stack or on a standalone
switch to collect Ethernet group statistics, which include usage statistics about broadcast and multicast
packets, and error statistics about cyclic redundancy check (CRC) alignment errors and collisions. Use
the no form of this command to return to the default setting.
rmon collection stats index [owner name]
no rmon collection stats index [owner name]
Syntax Description
Defaults The RMON statistics collection is disabled.
Command Modes Interface configuration
Command History
Usage Guidelines The RMON statistics collection command is based on hardware counters.
Examples This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# rmon collection stats 2 owner root
You can verify your setting by entering the show rmon statistics privileged EXEC command.
Related Commands
index Remote Network Monitoring (RMON) collection control index. The range
is
1 to 65535.
owner name (Optional) Owner of the RMON collection.
Release Modification
12.2(53)SE2 This command was introduced.
Command Description
show rmon statistics Displays RMON statistics.
To Next Page
Loading...
Need help?
General