Cisco Catalyst 3560X-24P - Show Network-Policy Profile

2-727
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show network-policy profile
show network-policy profile
Use the show network policy profile privileged EXEC command to display the network-policy profiles.
show network-policy profile [profile number] [detail] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show network-policy profile command:
Switch# show network-policy profile
Network Policy Profile 10
voice vlan 17 cos 4
Interface:
none
Network Policy Profile 30
voice vlan 30 cos 5
Interface:
none
Network Policy Profile 36
voice vlan 4 cos 3
Interface:
Interface_id
Related Commands
profile
number
(Optional) Display the network-policy profile number. If no profile is entered, all
network-policy profiles appear.
detail (Optional) Display detailed status and statistics information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(50)SE This command was introduced.
12.2(53)SE2 This command was introduced.
Command Description
network-policy Applies a network-policy to an interface.
network-policy profile (global
configuration)
Creates the network-policy profile.
network-policy profile
(network-policy configuration)
Configures the attributes of network-policy profiles.