2-674
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show mac address-table count
show mac address-table count
Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
show mac address-table count [vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If no VLAN number is specified, the address count for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for Vlan : 1
---------------------------
Dynamic Address Count : 2
Static Address Count : 0
Total Mac Addresses : 2
vlan vlan-id (Optional) Display the number of addresses for a specific VLAN. The range is 1
to
4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(53)SE2 This command was introduced.
To Next Page
Loading...
Need help?
General