xxiii
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Preface
Audience
This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to
manage the Catalyst 3750-X and 3560-X switch, or the Catalyst 3750-X switch stack, referred to as the
switch. Before using this guide, you should have experience working with the Cisco IOS commands and
the switch software features. Before using this guide, you should have experience working with the
concepts and terminology of Ethernet and local area networking.
Purpose
This guide provides the information that you need about the Layer 2 and Layer 3 commands that have
been created or changed for use with the Catalyst 3750-X and 3560-X switches. For information about
the standard Cisco IOS Release
12.2 commands, see the Cisco IOS documentation set available from the
Cisco.com home page by selecting Technical Support & Documentation > Documentation > Cisco
IOS Software.
Note Switches running the LAN base feature set do not support Layer 3 features.
This guide does not provide procedures for configuring your switch. For detailed configuration
procedures, see the software configuration guide for this release.
This guide does not describe system messages you might encounter. For more information, see the
system message guide for this release.
For documentation updates, see the release notes for this release.
Conventions
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
• Commands and keywords are in boldface text.
• Arguments for which you supply values are in italic.
• Square brackets ([ ]) means optional elements.
To Next Page
Loading...
Need help?
General