Cisco Catalyst 3560X-24P

2-457
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
power inline police
Examples This example shows how to enable policing of the power consumption and configuring the switch to
generate a syslog message on the PoE port on a switch:
Switch(config)# interface gigabitethernet1/0/2
Switch(config-if)# power inline police action log
You can verify your settings by entering the show power inline police privileged EXEC command.
Related Commands Command Description
errdisable detect
cause inline-power
Enables error-disabled detection for the PoE cause.
errdisable recovery
cause inline-power
Configures the PoE recovery mechanism variables.
power inline Configures the power management mode on PoE ports.
power inline
consumption
Overrides the amount of power specified by the IEEE classification for the
powered device.
show power inline
police
Displays the power policing information about the real-time power
consumption.