2-655
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show lacp
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two
bytes are the system priority, and the last six bytes are the globally administered individual MAC address
associated to the system.
Related Commands Command Description
clear lacp Clears the LACP channel-group information.
lacp port-priority Configures the LACP port priority.
lacp system-priority Configures the LACP system priority.
To Next Page
Loading...
