2-752
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
show spanning-tree
spanning-tree loopguard default Prevents alternate or root ports from becoming the
designated port because of a failure that leads to a
unidirectional link.
spanning-tree mst configuration Enters multiple spanning-tree (MST) configuration mode
through which the MST region configuration occurs.
spanning-tree mst cost Sets the path cost for MST calculations.
spanning-tree mst forward-time Sets the forward-delay time for all MST instances.
spanning-tree mst hello-time Sets the interval between hello BPDUs sent by root switch
configuration messages.
spanning-tree mst max-age Sets the interval between messages that the spanning tree
receives from the root switch.
spanning-tree mst max-hops Sets the number of hops in an MST region before the
BPDU is discarded and the information held for an
interface is aged.
spanning-tree mst port-priority Configures an interface priority.
spanning-tree mst priority Configures the switch priority for the specified
spanning-tree instance.
spanning-tree mst root Configures the MST root switch priority and timers based
on the network diameter.
spanning-tree port-priority Configures an interface priority.
spanning-tree portfast (global
configuration)
Globally enables the BPDU filtering or the BPDU guard
feature on Port Fast-enabled interfaces or enables the Port
Fast feature on all nontrunking interfaces.
spanning-tree portfast (interface
configuration)
Enables the Port Fast feature on an interface and all its
associated VLANs.
spanning-tree uplinkfast Accelerates the choice of a new root port when a link or
switch fails or when the spanning tree reconfigures itself.
spanning-tree vlan Configures spanning tree on a per-VLAN basis.
Command Description
To Next Page
Loading...
Need help?
General