Cisco Catalyst 3560X-24P User Manual

2-788
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
snmp-server enable traps
dot1x [auth-fail-vlan |
guest-vlan |
no-auth-fail-vlan |
no-guest-vlan]
(Optional) Enable IEEE 802.1x traps. The keywords have these meanings:
• auth-fail-vlan—(Optional) Generate a trap when the port moves to the
configured restricted VLAN.
• guest-vlan—(Optional) Generate a trap when the port moves to the
configured guest VLAN.
• no-auth-fail-vlan—(Optional) Generate a trap when a port tries to enter
the restricted VLAN, but cannot because the restricted VLAN is not
configured.
• no-guest-vlan—(Optional) Generate a trap when a port tries to enter the
guest VLAN, but cannot because the guest VLAN is not configured.
Note When the snmp-server enable traps dot1x command is entered
(without any other keywords specified), all the IEEE 802.1x traps are
enabled.
entity (Optional) Enable SNMP entity traps.
envmon [fan |
shutdown | status |
supply | temperature]
Optional) Enable SNMP environmental traps. The keywords have these
meanings:
• fan—(Optional) Enable fan traps.
• shutdown—(Optional) Enable environmental monitor shutdown traps.
• status—(Optional) Enable SNMP environmental status-change traps.
• supply—(Optional) Enable environmental monitor power-supply traps.
• temperature—(Optional) Enable environmental monitor temperature
traps.
flash [insertion |
removal]
(Optional) Enable SNMP FLASH notifications. The keywords have these
meanings:
insertion—(Optional) Generate a trap when a switch (flash) is inserted into
a stack, either physically or because of a power cycle or reload.
removal—(Optional) Generate a trap when a switch (flash) is removed from
a stack, either physically or because of a power cycle or reload.
fru-ctrl (Optional) Generate entity field-replaceable unit (FRU) control traps. In a
switch stack, this trap refers to the insertion or removal of a switch in the
stack.
hsrp (Optional) Enable Hot Standby Router Protocol (HSRP) traps.
ipmulticast (Optional) Enable IP multicast routing traps.
mac-notification (Optional) Enable MAC address notification traps.
change (Optional) Enable MAC address change notification traps.
move (Optional) Enable MAC address move notification traps.
threshold (Optional) Enable MAC address table threshold traps.
msdp (Optional) Enable Multicast Source Discovery Protocol (MSDP) traps.

Cisco Catalyst 3560X-24P Specifications

General

Brand	Cisco
Model	Catalyst 3560X-24P
Category	Switch
Language	English