Cisco Firepower 4100

reinitialize
To completely reformat a module, use the reinitialize command.
reinitialize
Syntax Description
This command has no arguments or keywords.
Command Modes
Slot mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Reinitializing a module completely erases all stored application data. Please back up all running configuration
files before issuing the commit-buffer command.
Example
This example shows how to reinitialize the module in slot 2.
FP9300-A # scope ssa
FP9300-A /ssa # scope slot 2
FP9300-A /ssa/slot # reinitialize
Warning: Reinitializing blade takes a few minutes. All the application data on blade will
get lost. Please backup application running config files before commit-buffer.
FP9300-A /ssa/slot* #
Related Commands
DescriptionCommand
Decommissions a server.decommission
Cisco Firepower 4100/9300 FXOS Command Reference
115
A – R Commands
reinitialize