Cisco Firepower 4100 Command Reference

terminal
To set the number of lines, and the width of the lines, displayed in the terminal window, use the terminal
command.
terminal {length lines|width characters}
Syntax Description
The number of lines displayed in the terminal window. Valid values range
from 0 to 511 lines. Enter 0 to eliminate pausing.
length lines
The number of characters per line displayed in the terminal window. Valid
values range from 24 to 511 characters.
width characters
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to set the number of lines, and the number of characters per line, to be displayed in the
terminal window.
Example
This example shows how to set the number of lines displayed in the terminal window to 12:
FP9300-A# terminal length 12
FP9300-A *# commit-buffer
FP9300-A#
Related Commands
DescriptionCommand
Specifies whether command output lines wrap or truncate, whether table headers
are displayed, and whether commas or spaces are used to separate fields in
command output tables.
set cli
Cisco Firepower 4100/9300 FXOS Command Reference
380
T – W Commands
terminal

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English