Cisco Firepower 4100 Command Reference

acknowledge fault
To acknowledge a system fault, use the acknowledge fault command.
acknowledge fault id
Syntax Description
The fault identification number. The range of valid values is 0 to
18446744073709551615.
fault id
Command Modes
Multiple modes
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use the acknowledge fault command to acknowledge the existence of a fault.
Example
The following example shows how to acknowledge a fault:
firepower # acknowledge fault 11347599
firepower* # commit-buffer
firepower #
Related Commands
DescriptionCommand
Acknowledges a server on the device.acknowledge server
Acknowledges the existence of a slot in the device.acknowledge slot
Shows fault policy information.show fault
Cisco Firepower 4100/9300 FXOS Command Reference
27
A – R Commands
acknowledge fault

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English