Cisco Firepower 4100 Command Reference

set realm
To specify the default authentication service, use the set realm command.
set realm {ldap|local|none|radius|tacacs}
Syntax Description
Specifies LDAP authentication.ldap
Specifies local authentication.local
Allows local users to log on without specifying a password.none
Specifies RADIUS authentication.radius
Specifies TACACS+ authentication.tacacs
Command Modes
Default authentication mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to enter security/default-auth mode and set the default authentication service
to Radius:
FP9300-A# scope security
FP9300-A /security # scope default-auth
FP9300-A /security/default-auth # set realm radius
FP9300-A /security/default-auth* # commit-buffer
FP9300-A /security/default-auth #
Related Commands
DescriptionCommand
Specifies an associated authentication provider group.set auth-server-group
Sets the authentication method to two-factor authentication for a Radius or
TACACS+ realm.
set use-2-factor
Cisco Firepower 4100/9300 FXOS Command Reference
215
S Commands
set realm

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English