Cisco Firepower 4100 - Sh Commands

sh Commands
• show (app-instance), on page 237
• show auth-domain, on page 239
• show (firmware-install), on page 240
• show (management interface), on page 241
• show (slot), on page 242
• show breakout, on page 244
• show callhome, on page 245
• show cc-mode, on page 246
• show certreq, on page 247
• show chassis, on page 249
• show cli, on page 251
• show clock, on page 252
• show cloud-connector, on page 253
• show configuration, on page 254
• show connection, on page 255
• show download-task, on page 256
• show environment, on page 258
• show eth-uplink, on page 260
• show event, on page 262
• show fabric, on page 263
• show fabric-interconnect, on page 264
• show fan-module, on page 266
• show fault, on page 268
• show fips-mode, on page 270
• show firmware, on page 271
• show https, on page 273
• show identity, on page 274
• show interface, on page 277
• show interface brief (connect fxos), on page 280
• show inventory, on page 292
• show ip-block, on page 296
• show ipsec-log, on page 298
• show ipv6-block, on page 300
Cisco Firepower 4100/9300 FXOS Command Reference
235