scope monitoring
To enter system monitoring mode, use the scope monitoring command.
scope monitoring
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You do not have to enter this mode with a managed object.
Example
This example shows how to enter monitoring mode:
FP9300-A#scope monitoring
FP9300-A /monitoring #
Related Commands
DescriptionCommand
Shows information about the status of a server.show server status
Cisco Firepower 4100/9300 FXOS Command Reference
144
S Commands
scope monitoring