Cisco Firepower 4100

up
To move up one level in the command-mode hierarchy, use the up command.
up
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to move up one mode:
FP9300-A /org/service-profile # up
FP9300-A /org #
Related Commands
DescriptionCommand
Exits the current CLI session and disconnects from the device, or exits from a
connected object mode and returns to the root (EXEC) level.
exit
Enters root (EXEC) from any mode.top
Cisco Firepower 4100/9300 FXOS Command Reference
384
T – W Commands
up