Cisco Firepower 4100

A – C Commands
• acknowledge fault, on page 27
• acknowledge server, on page 28
• acknowledge slot, on page 29
• activate firmware, on page 30
• backup sel, on page 31
• cancel, on page 32
• clear lock-status, on page 33
• clear password-history, on page 34
• clear sel, on page 35
• commit-buffer, on page 36
• connect adapter, on page 37
• connect asa, on page 38
• connect cimc, on page 40
• connect ftd, on page 42
• connect fxos, on page 44
• connect local-mgmt, on page 46
• connect module, on page 48
• connect vdp, on page 50
• create app-instance, on page 52
• create bootstrap-key FIREWALL_MODE, on page 53
• create bootstrap-key PERMIT_EXPERT_MODE, on page 54
• create certreq, on page 55
• create connection, on page 57
• create destination, on page 58
• create ip-block, on page 60
• create ipv6-block, on page 62
• create keyring, on page 64
• create local-user, on page 65
• create policy (callhome), on page 67
• create policy (flow control), on page 70
• create profile, on page 71
• create resource-profile, on page 73
• create ssh-server, on page 75
Cisco Firepower 4100/9300 FXOS Command Reference
25