Cisco Firepower 4100

scope vnic
To enter virtual NIC mode, use the scope vnic command.
scope vnic dynamic_mac
Syntax Description
The virtual NICʼs dynamic MAC address.
dynamic_mac
Command Modes
EXEC mode
Service profile mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to enter virtual NIC mode while in organization mode:
FP9300-A # scope org org10
FP9300-A /org # scope service-profile sp10
FP9300-A /org/service-profile # scope vnic vNIC10
FP9300-A /org/service-profile/vnic #
Related Commands
DescriptionCommand
Shows information about the available network adapters.show server adapter
Cisco Firepower 4100/9300 FXOS Command Reference
156
S Commands
scope vnic