Cisco Firepower 4100 Command Reference

cycle
To power-cycle a security module/engine, use one of the cycle commands.
cycle {cycle-immediate | cycle-wait}
Syntax Description
Power-cycles the module immediately.cycle-immediate
The system waits up to five minutes for the application running on the module
to shut down before power-cycling the module.
cycle-wait
Command Modes
Service Profile (/service-profile) mode
Command History
ModificationRelease
This command was introduced.1.1(1)
Example
This example shows how to power-cycle a module after its running application is shut down:
FP9300-A # scope service-profile server 1/1
FP9300-A /org/service-profile # cycle cycle-wait
FP9300-A /org/service-profile* # commit-buffer
FP9300-A /org/service-profile #
Related Commands
DescriptionCommand
Takes a network module offline or online.set adminstate
Cisco Firepower 4100/9300 FXOS Command Reference
80
A – R Commands
cycle

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English