Cisco Firepower 4100 Command Reference

decommission
To decommission a server, use the decommission server command.
decommission server {id|chassis_id/blade_id}
Syntax Description
The server identification number. This is a value between 1 and 255.
id
The chassis and blade identification numbers in n/n format.
chassis_id/blade_id
Usage Guidelines
Depending on the type of device hosting the module to be decommissioned, identify it using its module ID
(4100 series), or the chassis number and module number (9300 devices).
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.4(1)
Example
This example shows how to decommission a server:
FP9300-A# decommission server 1/1
FP9300-A* # commit-buffer
FP9300-A #
Related Commands
DescriptionCommand
Deletes a decommissioned server.delete decommissioned
Recommissions a decommissioned server.recommission
Shows any decommissioned servers.show server
decommissioned
Cisco Firepower 4100/9300 FXOS Command Reference
82
A – R Commands
decommission

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English