Cisco Firepower 4100 Command Reference

show psu
To view information about the installed power supply units, use the show psu command in chassis mode.
show psu [unit_id | detail | expand]
Syntax Description
(Optional) Enter a power-supply unit number to list information for that unit.
unit_id
(Optional) Use this keyword to list detailed information about each installed
power supply unit.
detail
(Optional) Use this keyword to display expanded power-supply information.expand
Command Modes
scope chassis/
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You can use this command without any arguments or keywords to display basic power-supply unit information.
Example
This example shows how to view detailed power-supply unit information:
firepower# scope chassis
firepower /chassis # show psu detail
PSU:
PSU: 1
Overall Status: N/A
Operability: N/A
Threshold Status: N/A
Power State: Off
Presence: Equipped
Thermal Status: OK
Voltage Status: N/A
Product Name: Cisco Firepower 9000 Series AC Power Supply
PID: FPR9K-PS-AC
VID: V00
Part Number: 341-0723-01
Vendor: Cisco Systems Inc
Serial (SN): DTM190705G3
HW Revision: 0
Firmware Version: N/A
Type: DV
Wattage (W): 0
Input Source: Unknown
PSU: 2
Overall Status: Operable
Operability: Operable
Threshold Status: OK
Power State: On
Presence: Equipped
Cisco Firepower 4100/9300 FXOS Command Reference
317
S Commands
show psu

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English