Cisco Firepower 4100

show ntp-overall-status
To display overall Network Time Protocol synchronization status for the system, use the show
ntp-overall-status command.
show ntp-overall-status
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Example
This example shows how to display current clock-synchronization status for chassis and any logical
devices installed on the chassis:
FP9300-A# show ntp-overall-status
NTP Overall Time-Sync Status: Time Synchronized
FP9300-A#
Related Commands
DescriptionCommand
Displays the system clock.show clock
Cisco Firepower 4100/9300 FXOS Command Reference
311
S Commands
show ntp-overall-status