Cisco Firepower 4100 Command Reference

show server cpu
To display information about the server CPUs, use the show server cpu command.
show server cpu [server_id|detail|uuid dynamic_uuid]
Syntax Description
(Optional) Displays the CPU information for a specific server, expressed as
chassis-number/server-number (rack ID is not a valid option). The keyword
detail is available with this option.
server_id
(Optional) Displays detailed CPU information in list form.detail
(Optional) Displays the CPU information for a particular server, specified with
its dynamic universally unique identifier (UUID); entered in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN. The keyword detail is available
with this option.
uuid dynamic_uuid
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays CPU information for all servers.
Example
This example shows how to display information about the CPUs in server 1 in chassis 1:
FP9300-A# show server cpu 1/1
Server 1/1:
ID Presence Architecture Socket Cores
Speed (GHz)
--- -------------------- ----------------- ------ -------
---- -----------
1 Equipped Xeon CPU1 12
2.200000
2 Equipped Xeon CPU2 12
2.200000
FP9300-A#
Related Commands
DescriptionCommand
Displays information about the servers installed in this device.show server inventory
Cisco Firepower 4100/9300 FXOS Command Reference
334
S Commands
show server cpu

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English