Cisco Firepower 4100 Command Reference

scope
To “scope into” (enter) an existing managed object, use the relevant scope command in the appropriate
command mode.
scope object_type name [parameters]
Syntax Description
The type of object to be entered. Examples include local user account and
organization.
object_type
The name of the specific object to be entered.
name
(Optional) Any additional properties or parameters needed to identify the
object. With this command, the name is generally sufficient to identify an
object. Refer to the description of the create command for the specific object
type for more information.
parameters
Command Modes
Depends on the type of object being scoped into; refer to the description of the create command for the specific
object type for more information.
Command History
Refer to the description of the create command for the specific object type for history information.
Usage Guidelines
Objects are abstract representations of physical components or logical entities that can be managed. For
example, the chassis, security modules, network modules, ports, and processors are physical components
represented as managed objects, while licenses, user roles, and platform policies are logical entities represented
as managed objects.
FXOS provides four general commands for managing objects: create, delete, enter, and scope. For example,
you can create a local user account, you can delete a local user account, and you can enter a local user account
to assign or change properties for that account; you also can “scope into” the local user account to assign or
change properties.
Generally, the keywords and options available to each of these object-management commands are the same,
so we detail only the create version of the various object commands. In other words, for information about
the delete command for a particular object, refer to the description of the create command for that object.
For example, refer to create local-user, on page 65 for information related to scoping into an existing local
user account.
Example
This example shows how to enter security mode, scope into a local user account and display account
details:
firepower # scope security
firepower /security # scope local-user test_user
firepower /security/local-user # show detail
Local User test_user:
First Name: test
Last Name: user
Email: test_user@testuser.com
Phone:
Cisco Firepower 4100/9300 FXOS Command Reference
124
S Commands
scope

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English