scope system
To enter system mode, use the scope system command.
scope system
Syntax Description
This command has no arguments or keywords.
Command Modes
EXEC mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
You do not have to enter this mode with a managed object.
Example
This example shows how to enter system mode:
FP9300-A# scope system
FP9300-A /system #
Related Commands
DescriptionCommand
Shows information about the systems configured on this device.show system
Cisco Firepower 4100/9300 FXOS Command Reference
155
S Commands
scope system
To Next Page
Loading...
