Cisco Firepower 4100 Command Reference

show server memory
To display information about the server dual in-line memory modules (DIMMs) installed in this device, use
the show server memory command.
show server memory [server_id|detail|uuid dynamic_uuid]
Syntax Description
(Optional) Displays memory information for a specific server, specified by
chassis-number/server-number (rack ID is not a valid option).
server_id
(Optional) Displays detailed memory information for each server.detail
(Optional) Displays memory information for a particular server, specified using
its dynamic universally unique identifier (UUID), entered in the form
NNNNNNNN-NNNN-NNNN-NNNN-NNNNNNNNNNNN.
uuid dynamic_uuid
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command lists memory information for each server.
Example
This example shows how to display detailed memory information:
FP9300-A# show server memory detail
Server 1/1:
Array 1:
CPU ID: 1
Current Capacity (MB): 262144
Error Correction: Undisc
Max Capacity (MB): 1572864
Max Devices: 24
Populated: 16
DIMMS:
ID 1:
Location: A1
Presence: Equipped
Overall Status: Operable
Visibility: Yes
Vendor: 0xAD00
Vendor Part Number: HMA42GR7MFR4N-TF
Vendor Serial (SN): 244BC0A6
HW Revision: 0
Form Factor: DIMM
Type: Undisc
Capacity (MB): 16384
Clock: 2133
Latency: 0.500000
Cisco Firepower 4100/9300 FXOS Command Reference
344
S Commands
show server memory

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English