Cisco Firepower 4100 Command Reference

set address
To set an email or URL address for a Smart Call Home or Smart Licensing destination, use the set address
command.
set address address
Syntax Description
The email address or URL of the Smart Call Home or Smart Licensing
destination.
address
Command Modes
scope monitoring/scope callhome/scope profile/scope destination/
Command History
ModificationRelease
Command added.1.4(1)
Usage Guidelines
Each Firepower 4100/9300 chassis must be registered with the Smart Call Home License Authority or Smart
License satellite server. Use this command to set an email or HTTP/HTTPS URL address as the licensing
destination.
License Authority example: https://tools.cisco.com/its/service/oddce/services/DDCEService
Satellite server example: https://ip_address/Transportgateway/services/DeviceRequestHandler
Example
This example shows how to create and enter a Smart Call Home destination:
firepower # scope monitoring
firepower /monitoring # scope callhome
firepower /monitoring/callhome # scope profile SLProfile
firepower /monitoring/callhome/profile # scope destination SLDest
firepower /monitoring/callhome/profile/destination # set address
https://tools.cisco.com/its/service/oddce/services/DDCEService
firepower /monitoring/callhome/profile/destination* # commit-buffer
firepower /monitoring/callhome/profile/destination #
Related Commands
DescriptionCommand
Creates a new Smart Call Home destination.create destination
Deletes an existing Smart Call Home destination.delete destination
Sets the transport protocol for a Smart Call Home destination.set protocol
Cisco Firepower 4100/9300 FXOS Command Reference
163
S Commands
set address

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English