Cisco Firepower 4100 Command Reference

set keyring-name
To assign a keyring to an IPSec connection, use the set keyring-name command.
set keyring-name name
Syntax Description
The name of a keyring to be assigned to the IPSec connection; maximum of
16 characters.
name
Command Modes
Connection (/security/ipsec/connection) mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this command to add a keyring to an IPSec connection.
Example
This example shows how to add a keyring to the current IPSec connection:
FP9300-A # scope security
FP9300-A /security # scope ipsec
FP9300-A /security/ipsec # enter connection testconn
FP9300-A /security/ipsec/connection # set keyring-name kr22
FP9300-A /security/ipsec/connection* # commit-buffer
FP9300-A /security/ipsec/connection #
DescriptionCommand
Creates a new IPSec connection.create connection
Specifies the passphrase for a keyring assigned to an IPSec connection.set keyring-passwd
Cisco Firepower 4100/9300 FXOS Command Reference
195
S Commands
set keyring-name

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English