set resource-profile-name
To set the resource profile for an application instance, use the set resource-profile-name command.
set resource-profile-name profile_name
Syntax Description
Sets the resource profile name for this application instance.
profile_name
Command Modes
scope ssa/scope slot/create app-instance/
Command History
ModificationRelease
Can now be used for container instances.2.4(1)
Command added for use with vDP.1.1(1)
Usage Guidelines
For vDP, resource profiles are pre-created in the FXOS configuration. For container instances, create resource
profiles using the create resource-profilecommand. Use the show app-resource-profile command to view
available profiles.
Example
The following example shows how to set the the resource profile for a vDP application instance:
firepower# scope ssa
firepower /ssa # show app
Name Version Author Supported Deploy Types CSP Type Is Default App
---------- --------------- ---------- ---------------------- ----------- --------------
asa 9.10.1 cisco Native Application Yes
ftd 6.2.3 cisco Native Application Yes
vdp 8.13.01.09-2 radware Vm Application Yes
firepower /ssa # scope app vdp 8.13.01.09-2
firepower /ssa/app # show app-resource-profile
Profile Name Security Model CPU Logical Core Count RAM Size (MB) Default
Profile
------------------------- --------------- ---------------------- ---------------
---------------
DEFAULT-4110-RESOURCE FPR4K-SM-12 4 16384 Yes
DEFAULT-RESOURCE FPR9K-SM-56, FPR9K-SM-44, FPR9K-SM-36, FPR9K-SM-24, FPR4K-SM-44,
FPR4K-SM-36, FPR4K-SM-24
6 24576 Yes
VDP-10-CORES FPR9K-SM-56, FPR9K-SM-44, FPR9K-SM-36, FPR9K-SM-24, FPR4K-SM-44,
FPR4K-SM-36, FPR4K-SM-24
10 40960 No
VDP-2-CORES all 2 8192 No
VDP-4-CORES all 4 16384 No
VDP-8-CORES FPR9K-SM-56, FPR9K-SM-44, FPR9K-SM-36, FPR9K-SM-24, FPR4K-SM-44,
FPR4K-SM-36, FPR4K-SM-24
8 32768 No
firepower /ssa/app # exit
Cisco Firepower 4100/9300 FXOS Command Reference
222
S Commands
set resource-profile-name