Cisco Firepower 4100 Command Reference

show system
To display information about the systems configured on this device, use the show system command.
show system [detail|firmware|version]
Syntax Description
(Optional) Displays detailed system information.detail
(Optional) Displays system firmware-version and status information.
The optional keywords detail and expand are also available.
firmware
(Optional) Displays system version and status information.
The optional keywords detail and expand are also available.
version
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
By default, this command displays name, mode and IP addresses for each configured system.
Example
This example shows how to display expanded system version information:
FP9300-A# show system version expand
FPRM:
Running-Vers: 4.2(1.62)
Package-Vers: 2.2(1.63)
Activate-Status: Ready
Catalog:
Running-Vers: 4.2(1.62)T
Package-Vers: 2.2(1.63)
Activate-Status: Ready
Management Extension:
Running-Vers: 2.2(1.8)
Package-Vers: 2.2(1.63)
Activate-Status: Ready
Fabric Interconnect A:
Running-Kern-Vers: 5.0(3)N2(4.21.62)
Running-Sys-Vers: 5.0(3)N2(4.21.62)
Package-Vers: 2.2(1.63)
Startup-Kern-Vers: 5.0(3)N2(4.21.62)
Startup-Sys-Vers: 5.0(3)N2(4.21.62)
Act-Kern-Status: Ready
Act-Sys-Status: Ready
Bootloader-Vers:
Chassis 1:
Cisco Firepower 4100/9300 FXOS Command Reference
363
S Commands
show system

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English