Cisco Firepower 4100

scope firmware-install
To enter firmware-installation mode, use the scope firmware-install command.
scope firmware-install
Syntax Description
This command has no arguments or keywords.
Command Modes
Firmware mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
Use this scope to update system firmware with a previously downloaded firmware package.
Example
This example shows how to enter firmware-installation mode:
FP9300-A# scope firmware
FP9300-A /firmware # scope firmware-install
FP9300-A /firmware-install #
Related Commands
DescriptionCommand
Downloads a firmware package.download image
Installs a firmware package.install firmware
Cisco Firepower 4100/9300 FXOS Command Reference
139
S Commands
scope firmware-install