Cisco Firepower 4100

State Reason: Administratively down
Port Name: Ethernet2/7
Port Type: Data
Admin State: Disabled
Oper State: Sfp Not Present
State Reason: Unknown
Port Name: Ethernet2/8
Port Type: Data
Admin State: Disabled
Oper State: Sfp Not Present
State Reason: Unknown
Port Channel:
Port Channel Id: 48
Name: Port-channel48
Port Type: Cluster
Admin State: Enabled
Oper State: Failed
State Reason: No operational members
Member Port:
Port Name Membership Oper State State Reason
--------------- ------------------ ---------------- ------------
Ethernet1/5 Down Link Down Link failure or
not-connected
Ethernet1/6 Down Link Down Link failure or
not-connected
Stats Threshold Policy:
Name: default
Full Name: fabric/lan/thr-policy-default
Policy Owner: Local
UDLD link policy:
Name Admin State UDLD mode
---------- ----------- ---------
default Disabled Normal
firepower#
Related Commands
DescriptionCommand
Enters Ethernet uplink mode.scope eth-uplink
Cisco Firepower 4100/9300 FXOS Command Reference
261
S Commands
show eth-uplink