Cisco Firepower 4100 Command Reference

(Optional) Displays the world-wide name (WWN) information for a system.
The following optional keywords are also available:
• detail —Displays details about the identity information in list format.
• id —Displays identity information for a specific WWN; provide a unique
WWN identifier in the form FF:FF:FF:FF:FF:FF:FF:FF.
• pool-info —Displays identity information for the pool. The detail
keyword is also available.
• profile-info —Displays identity information for the profile. The detail
keyword is also available.
wwn
Command Modes
Any command mode
Command History
ModificationRelease
Command added.1.1(1)
Usage Guidelines
IQN pools and prefixes must be configured in order to use the show identity iqn command.
Example
This example shows how to display detailed identity information for the device’s IPv4 addresses:
FP9300-A# show identity ip-addr detail
IP Address: 192.0.2.9
Assigned: No
Assigned Service Profile:
Owner: Pool
IP Address: 192.0.2.10
Assigned: No
Assigned Service Profile:
Owner: Pool
IP Address: 192.0.2.11
Assigned: No
Assigned Service Profile:
Owner: Pool
IP Address: 192.0.2.12
Assigned: No
Assigned Service Profile:
Owner: Pool
<--- remaining lines removed for brevity --->
FP9300-A#
Related Commands
DescriptionCommand
Shows identity information for a servers, adapters and interfaces.show server identity
Cisco Firepower 4100/9300 FXOS Command Reference
276
S Commands
show identity

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English