Cisco Firepower 4100

DescriptionField
Detailed interface state reason:
Transceiver Initializing
Other
None
Hardware failure
Diag failure
Error disabled
Port Software failure
Link failure or not connected
offline
Non participating
Initializing
Inactive
Administratively down
Channel admin down
Suspended (interface)
Suspended (port)
Channel membership update in progress
RCF is in progress
Isolation due to ELP failure
Isolation due to ESC failure
Isolation due to domain overlap
Isolation due to domain id assignment failure
Isolation due to domain other side eport isolated
Isolation due to invalid fabric reconfiguration
Isolation due to domain manager disabled
Isolation due to zone merge failure
Isolation due to vsan not configured on peer
Parent Interface Admin Down
Tunnel port src interface unbound
Interface is removed
SFP not present
Error disabled due to SFP vendor not supported
Cisco Firepower 4100/9300 FXOS Command Reference
284
S Commands
show interface brief (connect fxos)