Cisco Firepower 4100 Command Reference

Usage Guidelines
By default, this command lists information for each service profile.
Examples
This example shows how to display inventory information for a specific service profile:
FP9300-A# show service-profile inventory name ssp-sprof-1
Service Profile Name Type Server Assignment Association
-------------------- ----------------- ------- ---------- -----------
ssp-sprof-1 Instance 1/1 Assigned Associated
FP9300-A#
This example shows how to display power status information for the service profiles:
FP9300-A# show service-profile status power
Service Profile Name: ssp-sprof-1
Type: Instance
Server: 1/1
Description: ssp service profile
Assignment: Assigned
Association: Associated
Power State: On
Op State: Ok
Oper Qualifier: N/A
Conf State: Applied
Config Qual (Deprecated): N/A
Server Config Issues: N/A
Network Config Issues: N/A
Storage Config Issues: N/A
vNIC Config Issues: N/A
iSCSI Config Issues: N/A
Current Task:
Server 1/1:
Overall Status: Ok
Operability: Operable
Oper Power: On
Motherboard:
Threshold Status: OK
Overall Status: N/A
Operability: N/A
Oper Power: On
Power State: Ok
Thermal Status: OK
Voltage Status: OK
CMOS Battery Voltage Status: Ok
Mother Board Power Usage Status: Ok
Motherboard Temperature Statistics:
Motherboard Front Temperature (C): 42.000000
Motherboard Rear Temperature (C): 57.000000
<--- remaining lines removed for brevity --->
FP9300-A#
Cisco Firepower 4100/9300 FXOS Command Reference
355
S Commands
show service-profile

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English