Cisco Firepower 4100 Command Reference

Additional InformationCommand
Show the mezz card 2 FRU informationmezz2fru
Dump MrcOut*.txtmrcout
view network status in realtime ;
Dump Network information
network
Dump the OBFL - on-board fault log
dump - Dump OBFL
follow - Tail and Follow OBFL
tail - Dump the last 100 messages
obfl
Dump BIOS Post Informationpost
view power status in realtime
Dump Blade Power Status
power
Dump Board Programmable Versionsprogrammables
view all sensors in realtime
sensors [all|power|temp|fault|pres|led]
all - Dump all Sensors (default)
power - Dump only Power Sensors
temp - Dump only Temprature Sensors
fault - Dump only Fault Sensors
pres - Dump only Presence Sensors
led - Dump only LED Sensors
sensors
Show the Blade SEL Information - system event logsel
Cisco CIMC Interactive Debug
This command performs interactive debug authentication with the aid of the user
and Cisco support personnel.
sldp
Dump Running Task Informationtasks
Run TOP Process Monitoringtop
Current Firmware Update Statusupdate
Dump IPMI Usersusers
Get the Version Informationversion
Cisco Firepower 4100/9300 FXOS Command Reference
395
connect shell Commands
connect cimc: Command List

Cisco Firepower 4100 Specifications

General

Brand	Cisco
Model	Firepower 4100
Category	Firewall
Language	English